Visbella Popular Sale No Heat Advanced Leather Repair Gel

Description

Product Description
Visbella® DIY Leather and Vinyl Repair Kit is very handy and easy to help you to repair any cracks,cuts,burns and tears on
leather and vinyl material surface.A variety of colors and grain papers designed to match surrounding materials makes repairs blend in with existing vinyl or leather.A color matching guide helps determine the correct color to match the damaged surface. With the complete directions that are included in the kit,you can achieve a quality result without the cost or expertise of a professional.
Product Information
Product name
diy leather and vinyl repair kit
Packaging
48 pcs/carton
Usage
Leather & Vinyl
Classification
Other Adhesives
Content
7pcs heat cure compounds
1pc 15gm repair adhesive
1pc heat transfer tool
2pcs grain paper
1pc backing fabric
1pc leather piece
1pc mixture cup
1pc spatula
1pc glove
Application
Repair leather scratches, crack, burns, peel off etc.
Shelf Life
18 months
Handy tips:
*Before using the product, it is recommened to first practice on an area that is usually unusen or hidden from view( the back of your couch for example) or with the provided samples.
*When mixing your desired color, check the color match by rubbing a small amount to paint onto the undamaged vinyl. Remove the paint with a rag.
*During Step2 and 4, you can use a hairdryer to speed up the drying process.
*Keep the paint jar cup closed to prevent the paint from drying up. Also, make sure the sealer adhesive is not left open for an extensive amount of time.
*For repair smaller than 1/4 of an inch, the backing fabric is not required in the repair.
*If too much adhesive is applied, use a wet sponge to remove excess adhesive before it dries. If the adhesive dries, using rubbing alcohol or nail polish remover to remove the dried adhesive.
KEEP OUT OF REACH OF CHILDREN.
How To Use It
Instruction:
1. Clean the damaged area with a household cleaner. Make sure the area is dry before starting the repair. Carefully trim off frayed, excess threads, or charred material with a razor blade or knife. If there is burn damage, remove charred material with razor or knife.
2. For repair greater than 1/4 an inch, cut the enclosed backing fabric slightly larger than the damaged area. Use the spatula to insert the backing fabric into and under the damaged area to provide support for the repair.
3. Enclosed are three different texture of grain paper: fine coarse and medium. Select the grain paper that is the closest match to the damaged vinyl. On the top center of grain paper, make outline of the damaged area. This will allow you to accurately position the heat transfer tool in step 7.
4.For deep damages, like a vinyl dashboard, use the vinyl adhesive to glue the backing fabric in place and fill in damaged area to level with the surface. Allow the adhesive fully dry. This will take 2-3 hours at room temperature (a hair dryer can be used to speed up this process).The adhesive will shrink when dry, leaving a void which will be filedl in with colored repair compound later.
5. Prepare the color repair compound while the adhesive is drying. Refer to the provided colorchart.Choose from the 7 provided colors by using the spatula to mix small amount of color until correct shade is achieved. If you need to lighten the color, add small drops of white paint and if you need to darken, add small drops of black paint. Check the color accuracy by rubbing a small amount of color onto the undamaged vinyl, then remove the compound with a rag.
6. Once vinyl adhesive is dry, use the spatula to evenly and neatly apply the repair compound onto the damaged area. Wipe any excess compound from around the hole or damage. DO NOT OVERFILL DAMAGED AREA. It is highly recommended to use less compound rather than more. It is easier to add more later if necessary. Next tape the grain paper over the uncured
color compound making sure the outling is directly over the damaged area. Do not move it. If repair is on a vertical surface, tape the grain paper down.
7. This is the most important step in the repair process.Note: Heating element required. Plug in a hot iron and allow it to warm up for four minutes on a high setting.Place the metal tip of the heat transfer tool directly onto the iron for 2-3 minutes to heat the tool. Then, immediately place the heat metal tip onto grain paper. Rotate the heat tool over the marked circle in a rapid circular motion for 1 minute. For a proper cure, heat must be applied over grain paper. If repair is large, reheat the tool and repeat the procedure as many times as needed until the repair paint is dry. Allow 1-2 minutes for the grrain paper to cool. Once cooled, slowly peel off the grain paper and examine the repair. If damaged area is tacky, repeat this step. If there are any pinholes or spots that were not filled in properly, apply small additional amount of repair compound onto those areas and repeat this step.
Note: Without heat transfter tool step
After step 6, leave the grain paper to dry for 24 hours. Using a hair dryer can speed up this process. Then, tear off the grain paper and the repair is finished.
More Products
Company Profile
Production Line
Certifications
Packaging And Transportation
All Policy
Payment Policy:
1) All payment should be paid within 7 days, if have any difficulty , please tell us the prospective times for your payment.
2) We accept PAYPAL,Visa/MasterCard,Discover and American Express.
3) It is quick and convenient to proceed the transaction.
Shipping Policy:
1) Free Shipping within the continental United States.
2) Please make sure to put the right shipping address. We do not carry responsibility for any incorrect or undeliverable addresses.
3) Estimated delivery dates- opens in a new window or tab include seller's handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.
Return Policy:
1)If you are not satisfied with product , please contact the us within 7 days after receiving the product.
2)If you need to return or replace the product , the seller will bear the cost.