-40%
Navy Blue Flame Resistant Coverall (Indura®)-NEW!-(sizes 34-60 regular & tall)
$ 12.11
- Description
- Size Guide
Description
WE ARE OPEN AND SHIPPINGCOVERALLS ARE SIZED ACCORDING TO WAIST SIZE, NOT CHEST SIZE. ORDER ACCORDING TO YOUR CHEST SIZE (YOUR CHEST SIZE COULD BE LARGER THAN THE COVERALL THAT CORRESPONDS TO YOUR WAIST SIZE.
For example, you could have a 42 inch chest and a 34 inch waist. In this case, you should order a size 38
FOR EXAMPLE, IF YOU ORDER A 56, THE WAIST SIZE WILL BE 56 INCHES, ETC.
PLS EMAIL FOR ANY HELP NEEDED WITH SIZING.
If you will be wearing clothing underneath, we suggest you measure your waist size while wearing the clothing from the outside for the most accurate sizing. If this is not possible, then consider going up one size.
Longs are 2 inches longer than regulars in body, sleeves, and legs.
Regulars are recommended for those 5'4" to 5'7". (Regulars have a 31 inch inseam, plus or minus 1 inch)
Longs are recommended for those 5'7" to 6'2". (Longs have a 33 inch inseam, plus or minus 1 inch and are 1 1/2 inches longer in the body and sleeves than a regular)
Fabric: 100% Cotton Flame-Resistant Indura®, 9 oz. (see below for more information about this fabric)
Description:
Concealed snap front
One exposed snap at neck
Concealed snap cuff with vent
Two front slash swing pockets
Side openings
Two hip patch pockets
Plain back
Ruler pocket
Banded waistband
Top stitched collar
MORE INFORMATION ABOUT INDURA
®
Fabric
: Westex 100% cotton, ammonia cured flame-resistant twill is self-extinguishing when removed from a flame or heat source.
Applications
: Multi-purpose protection from electric arc, flash fire, molten ferrous metal and welding exposures. Not intended for use against chemical exposures or near molten aluminum, magnesium, zinc, or in high static control situations.
Protection level
: Secondary protective clothing where intermittent exposure to molten substance splash, radiant heat, and flame is possible. ATPV of 7.7 cal/cm².
Garment life
: For 36-50 washings. Flame resistance is for the life of the garment.
Processing
: DO NOT WASH WITH CHLORINE BLEACH, STARCHES, SOFTENERS, AND OTHER ADDITIVES, as this will wash out the flame-resistant finish.